IPC 2017 Events

IPC Education Online: Wisdom Wednesdays

You are invited to the next Wisdom Wednesday session. This monthly briefing educates IPC members on topics relevant to the industry. Each FREE 30-minute session is offered only to IPC members, with replays available online. These sessions are led by industry experts who share their technical knowledge and insights.

As the speed of signal switching on a circuit board increases, it is critical for PCB designers to control the acceptable tolerance for impedance of printed circuit board traces. Because it is more difficult to address the issue after the components have been placed on the board, it is important to ensure that the impedance is correctly mitigated during the design phase.

How to Control Your Impedance, presented by Amit Bahl, Sierra Circuits, will be held on April 11 at 10:00-10:45 am CT. Bahl will give a detailed explanation of what controlled impedance is, how and why you need to control it in the manufacturing process, and how to design a board with controlled impedance. He will also provide information on common mistakes to avoid when designing and how to document controlled impedance requirements in design files.

Join us for this educational opportunity!

Register Today!

Registration required by April 10. You must enter your IPC Member Username and Password to access the registration page.

Do you have questions about registering? Ask at Registration@ipc.org or call +1 847-597-2861.

Register now even if you cannot attend the live broadcast! You will receive a link to the recording of the presentation after the broadcast. The session recording will also be available in the Members Only section of www.IPC.org.

Upcoming Session Dates:

April 25

 

Best Practices for Avoiding Intellectual Property Liability in Customer Agreements
Presented by Jeff Roth F&B Law Firm

May 9

 

Are You Ready for the Cloud? Is Your Data Secure?
Presented by Kevin Simpson, Sirius Computer Solutions

May 23

 

Fine Line Imaging and the Impact of Direct Imaging
Presented by Bob Ferguson, BreakFree Strategies

June 13

 

Highlights of 7095D BGA
Presented by Ray Prasad

June 27

 

Highlights of 7530B Reflow
Presented by Ray Prasad

July 11

 

Utilizing Grant Funding for Workforce IPC Certification
Presented by John Sammut, Firstronic, LLC

August 8

 

Topic: E-Textiles

August 22

 

Topic: TBD
Presented by Jason Marsh, NEXTFLEX

September 12

 

Topic: TBD

September 26

 

Topic: TBD

October 10

 

Topic: TBD

October 24

 

Topic: TBD

November 14

 

Topic: TBD

November 28

 

Results of PCB Technology Trends Study
Presented by Sharon Starr, IPC

December 12

 

Topic: TBD

Recordings of past sessions available online.