IPC 2010 Winter Interim Standards Development Meetings
January 7-16, 2010
GRACEinn Phoenix
10831 S. 51st Street
Phoenix, AZ 85044
+1 480-893-3000
For reservations: 800-843-6010
Web page:
www.graceinn.com
(Location and driving directions can be found through the Web page provided above).
IPC Sleeping Room Rate: $79/night (plus tax)
Rate includes breakfast.
Attendees should state “IPC Group Block” when calling.
Sleeping Room Cutoff Date: December 21, 2009
The Grace Inn provides complimentary Wi-Fi Internet access in sleeping rooms and all meeting rooms.
The Grace Inn provides complimentary shuttle transportation to Phoenix Sky Harbor International Airport. Complimentary shuttle service is also available within a five mile radius, based on shuttle availability.
The IPC Winter Interim Standards Development Meetings are designed to provide standards groups with the opportunity to make significant strides in document development away from the hustle and bustle of technical paper sessions, professional development workshops, and free forums common to the IPC APEX EXPO™ show.
Listed below are the standards development meetings planned for the 2010 Winter Interim Meetings.
For additional information on standards development meetings, contact John Perry at +1 847-597-2818 or JohnPerry@ipc.org.
IPC STAFF LIASION |
TIME |
SUBCOMMITTEE OR TASK GROUP |
Thursday, January 7, 2010 |
||
Dieter Bergman |
8:00 am – 5:00 pm |
2-10 CAD CAM and Electronic Documentation |
Friday, January 8, 2010 |
||
Dieter Bergman |
8:00 am – 5:00 pm |
2-10 CAD CAM and Electronic Documentation |
Jack Crawford |
8:00 am – 5:00 pm |
7-31B TG (IPC-A-610E) |
Saturday, January 9, 2010 |
||
Dieter Bergman |
8:00 am – 5:00 pm |
IPC Technology Roadmap Kick-Off |
Jack Crawford |
8:00 am – 5:00 pm |
5-22A J-STD-001E & 7 -31B IPC-A-610E common issues & 7-31BT IPC-A-610E Training |
Sunday, January 10, 2010 |
||
Jack Crawford |
8:00 am – 5:00 pm |
5-22A J-STD-001E & 5-22BT J-STD-001E Training |
Dieter Bergman |
8:00 am – 5:00 pm |
JNAC |
Monday, January 11, 2010 |
||
John Perry |
8:00 am – 12:00 pm |
D-51 Embedded Design SC (IPC-2227) |
Dieter Bergman |
8:00 am – 5:00 pm |
5-21h Bottom Termination Component TG (IPC-7093) |
Tom Newton |
8:00 am – 12:00 pm |
3-12a Metallic Foil TG |
John Perry |
1:00 pm – 5:00 pm |
D-12 Flex Performance SC (IPC-6013) |
Dave Torp |
8:00 am – 5:00 pm |
7-31j Electronic Enclosures TG (IPC-A-630) |
Jack Crawford |
8:00 am – 5:00 pm |
5-22AS J-STD-001ES Space Addendum |
Jack Crawford |
8:00 am – 5:00 pm |
7-35 Assembly & Joining SC (IPC-AJ-820) |
Tuesday, January 12, 2010 |
||
John Perry |
8:00 am – 12:00 pm |
D-35 Board Storage SC (IPC-1601) |
John Perry |
1:00 pm – 5:00 pm |
D-33a/7-31a TGs (IPC-A-600/IPC-6012) |
Dieter Bergman |
8:00 am – 5:00 pm |
5-21h Bottom Termination Component TG (IPC-7093) |
Tom Newton |
8:00 am – 12:00 pm |
D-13 Flex Materials SC (IPC-4200 Series) |
Tom Newton |
1:00 pm – 5:00 pm |
D-15 Flex Test Methods SC |
Jack Crawford |
8:00 am – 5:00 pm |
7-31FS A-620AS Space Addendum & Training |
John Perry |
8:00 am – 5:00 pm |
5-33c Conformal Coating Handbook TG (IPC-HDBK-830) |
Wednesday, January 13, 2010 |
||
John Perry |
8:00 am – 5:00 pm |
D-31b IPC-2221/2222 TG |
Tom Newton |
8:00 am – 5:00 pm |
Joint IPC D-13b Flex Covercoat & 5-33b Solder Mask TGs |
Dave Torp |
8:00 am – 5:00 pm |
5-31 Cleaning Handbook SC (IPC-CH-65) |
Dieter Bergman |
8:00 am – 5:00 pm |
Material Declaration Laminate (IPC-1753) |
Thursday, January 14, 2010 |
||
John Perry |
8:00 am – 12:00 pm |
1-10c Test Coupon/Artwork Generation TG |
Dieter Bergman |
8:00 am – 5:00 pm |
IPC Designer Council Module Development |
Friday, January 15, 2010 |
||
Dieter Bergman |
8:00 am – 5:00 pm |
IPC Designer Council Module Development |
Saturday, January 16, 2010 |
||
Dieter Bergman |
8:00 am – 5:00 pm |
IPC Designer Council Module Development |